Valuable Insights! A Review of Non-Ferrous Metals in 2017 and a Look Ahead to 2018


Release time:

2018-01-16

If we were to describe the non-ferrous metals market in 2017 with a single word, it would be “the bull market continues.” Why do we say it’s a continuation? Because this bull market began in 2016, but...

If we were to describe the non-ferrous metals market in 2017 with a single word, it would be “a prolonged bull market.” Why do we say “prolonged”? Because this bull market began in 2016, yet at the end of 2016, the market was still unclear about whether this rally truly marked the start of a bull run. Looking back now, the market’s performance has almost exceeded everyone’s expectations. In 2017, there were too many “unexpected” factors influencing the non-ferrous metals market. What exactly were these reasons, and what factors will shape the non-ferrous metals market in 2018? Stay tuned for the following article.

2017 Copper Market Review

  In 2017, copper prices delivered a standout performance. In this round of recovery, copper was the last among all metals to begin its upward trend. After a sharp rally in 2016, the price’s trading range shifted upward from the previous $4,700 to $5,700. During the first five months of 2017, copper prices fluctuated within the $5,500–$6,200 range. Due to weak demand at the beginning of the year, base metals experienced significant pullbacks in April and May. However, copper prices remained relatively resilient during this period, falling back by only about 10%. This resilience was closely linked to the supply shortages caused by the early-year Escondida strike and the unsuccessful negotiations at the Grasberg mine, which fueled bullish market sentiment. Precisely because these underlying bullish drivers had been suppressed in the first half of the year, when China’s economic outlook became clearly positive after May and metal prices across the board began to rise further, copper prices exhibited the strongest upward momentum. From $5,700, copper quickly broke through to a new platform at $6,700, thus crossing two $1,000 price levels in quick succession.

  In 2017, copper supply was tight. At the beginning of the year, the industry faced its first major copper mine strike at Escondida, compounded by the failure of Freeport and the Indonesian government to reach an agreement on future rights to the Grasberg mine. Additionally, factors such as declining ore grades at some copper mines and the impact of earthquakes on copper production have led to an estimated copper mine loss rate exceeding 5% this year, further tightening copper supply.

  Copper consumption has been better than expected. China’s demand for refined copper has grown faster than initially forecast at the start of the year, with the Northern Institute of Mining estimating an annual growth rate of 4.7%. The strong performance in copper consumption is largely driven by the rapid increase in China’s air-conditioner production. From January to November, China’s cumulative air-conditioner production increased by 20% year-on-year.

  In 2017, the global market as a whole remained in a tight balance. The shortage of copper ore did not significantly ripple through to the refined copper segment. On the one hand, inventories of copper concentrate continued to dwindle; on the other hand, the price spread between scrap copper and refined copper widened, leading to increased use of scrap copper, which helped offset the shortfall in copper concentrate. As a result, we did not see a substantial decline in inventories.

2018 Copper Market Outlook

  The tight supply of copper ore is easing, but the increase in supply may fall short of expectations. We believe that the risk of copper ore production falling below expectations next year far outweighs the risk of exceeding them. A production loss rate of 5% next year could very well become unavoidable. Next year will see numerous labor-management negotiations, all of which are key factors that the copper ore supply side will need to watch closely.

  Waste copper could become the final piece of the puzzle that influences—or even determines—the copper balance next year. Why is that? Because over the past several years, the annual copper balance has consistently shown either a shortage or a surplus of around 200,000 to 300,000 tons. Starting in 2019, China banned imports of “Category 7” waste materials, which include 700,000 tons of copper. If this figure drops by half next year—to 350,000 tons—then the situation regarding waste-copper imports next year will be a key factor that deserves close attention and will significantly influence market sentiment for some time to come.

  Consumption growth has slowed down due to the weakening in the real estate and infrastructure sectors. In 2017, China’s consumption growth was 4%, and we expect it to be around 2.5% in 2018. Although the economies of Europe and the U.S. are forecast to perform relatively well, their incremental demand for metals will remain limited. As a result, global consumption will be weighed down by the slowdown in China’s consumption growth—this is the primary factor weighing on copper prices.

  In 2018, both copper mines and metals markets will be in a tight balance, with prices initially declining before rebounding. In such a tightly balanced market, a sudden event is likely to determine the direction of copper prices. The previously mentioned developments in copper mine supply and scrap copper supply could both influence copper’s price trend at certain stages. Looking ahead from the current point in time, we believe that in the first half of the year, the market will focus more on macroeconomic factors—specifically, whether China’s economy will slow down, or in other words, whether metal demand will deteriorate. In the second half of the year, however, market attention will shift to the supply side, gradually giving rise to concerns about potential tightening of future copper mine supplies. As a result, copper prices are expected to initially decline and then rebound, following a V-shaped pattern.

2017 Aluminum Market Review

  The aluminum market continued its upward trend in 2017. Driven by China’s two major policies—capacity reduction and stringent environmental regulations—both domestic and international aluminum markets rose in tandem throughout 2017. As of the end of December 2017, international aluminum prices had risen by 26.6%, while domestic aluminum prices had increased by 17.5%.

  In 2017, the aluminum market was heavily influenced by Chinese policies. In the first half of the year, the Chinese government issued two major policies in quick succession: the "Special Action Plan for Rectifying Illegal and Non-compliant Projects in the Electrolytic Aluminum Industry" (Document No. 656) and the "Measures for Air Pollution Prevention in the Beijing-Tianjin-Hebei Region and Surrounding Areas" (the "2+26 Policy"). As a result of these two policies, China's operating capacity and output of electrolytic aluminum began to decline month by month starting from June. However, thanks to the sharp rise in aluminum prices—which spurred the commissioning of some newly built compliant capacities and the resumption of production at previously idle facilities—China's annual electrolytic aluminum output still surged by 12.2% to 36.5 million tons. Driven by China's strong performance, global electrolytic aluminum production also soared by 7% to 63.8 million tons for the year.
Aluminum consumption once again exceeded expectations. In 2017, the growth rate of aluminum consumption was estimated at around 8.5%, significantly higher than the previously forecast figure of 6.5%. Overall, the household appliance and transportation sectors were the main drivers supporting aluminum consumption. From a global perspective, countries and regions outside China also showed strong consumption momentum, resulting in robust growth in aluminum consumption in 2017.

  In 2017, the global primary aluminum market continued to experience a supply shortage, yet the Chinese market saw a significant surplus. Despite robust consumption both in China and elsewhere around the world, and despite the fact that China’s electrolytic aluminum production was constrained by two major policies one after another, the Chinese electrolytic aluminum market still ended up with a substantial oversupply for the year—while the global market remained characterized by a persistent shortage. The root cause of the large surplus in the Chinese market lies in the timing of these two major policies, which were most intensely implemented in the second half of the year, particularly during the fourth quarter. Meanwhile, in the first three quarters, driven by soaring aluminum prices, China’s electrolytic aluminum output rose sharply, causing market supply to repeatedly exceed demand.

2018 Aluminum Market Outlook

  Both production and consumption growth have slowed down. From a production perspective, the impact of the 2017 halt on illegal capacity and the winter reduction in aluminum plant output will fully materialize in 2018. Given the seriousness of the policy and the complexity of capacity replacement, the nearly 4 million tons per year of smelting capacity that was halted in 2017 is unlikely to resume production immediately. On the contrary, it remains doubtful whether the nearly 900,000 tons per year of capacity temporarily suspended during the heating season can be quickly restarted after the heating season ends. Although more than 3 million tons per year of newly built or delayed electrolytic aluminum capacity is still scheduled to come online in 2018, under the lingering influence of Document No. 656, whether these projects can be brought online as planned remains highly uncertain. We forecast that China’s electrolytic aluminum production growth rate in 2018 will slow to below 4%. Outside China, production growth has clearly accelerated, but its impact on the global landscape remains limited.

  In 2018, aluminum consumption will face triple constraints. First, declining real estate investment and new housing starts; second, a cooling of infrastructure development; and third, a slowdown in aluminum exports. The last factor is closely related to the various obstacles recently imposed by the United States on China’s exports of aluminum products. However, the slowdown in China’s economic growth is expected to be limited, and robust economic growth in developed countries itself will boost aluminum consumption. Therefore, we anticipate that China’s aluminum consumption growth will slow down by two percentage points to 6.5%, while global aluminum consumption will decline by less than one percentage point.

  The supply-demand balance in the Chinese market is tending toward equilibrium, while the global market’s supply gap is widening. It is expected that in 2018, the decline in China’s primary aluminum production will outpace the decline in consumption, ultimately bringing the domestic aluminum market into a state of equilibrium. From a global perspective, China’s modest increase in output and the stagnation of its aluminum exports are unlikely to be offset by growth in production elsewhere outside China; as a result, the global market’s supply gap has once again expanded to over one million tons.

  Aluminum prices have bottomed out and are now rebounding, with the range of price fluctuations narrowing. Based on the above analysis of supply and demand, compared to 2017, the fundamentals of both China’s and the global electrolytic aluminum markets have significantly improved in 2018. If we say that in 2017, the rise in Chinese aluminum prices had already priced in excessive policy benefits, then since November, the sharp drop in aluminum prices—from 17,250 yuan/ton to below 14,000 yuan/ton—has fully squeezed out the excess hype. Once consumption begins to recover normally in the second quarter, aluminum prices could resume their upward trend, and the pace of LME aluminum price increases is likely to outpace that of domestic prices.

2017 Zinc Market Review

  In 2017, zinc prices continued their bull run. Although the upward trend in 2017 wasn't as straight-line as in 2016—after experiencing a 20% pullback in the first and second quarters—the price of zinc kept rising, fueled by tight zinc ore supplies, better-than-expected performance of China's economy, and low inventory levels. On November 1, zinc prices reached their year-to-date high of $3,326 per ton.

  In 2017, the supply of zinc ore remained tight and this scarcity began to affect the metals market. The zinc ore shortage in 2017 was primarily driven by two factors: First, China’s output of zinc concentrate fell short of expectations. Stricter environmental inspections largely prevented small mines from reopening, meaning that despite high zinc prices, zinc ore production could not recover. Meanwhile, newly commissioned capacity also saw slow ramp-up due to various challenges, and the resource endowments of operating mines have been declining. Second, overseas mines entered a gap period between the closure of old mines and the commissioning of new ones. Since zinc prices had performed relatively weakly following the financial crisis, foreign mining companies showed little enthusiasm for exploring zinc deposits or developing new mines. As major mines such as Century closed down and Glencore deliberately reduced production, the resulting output reductions in 2016–2017 proved difficult to offset.

  Zinc consumption hasn't shown any standout performance, but it's not bad either. Judging from China's galvanized steel production and export data, China's zinc consumption figures haven't been impressive—year-on-year growth has narrowed, and in some months, consumption even posted negative growth. Meanwhile, end-user consumption has benefited from China's overall economic performance, which has been better than expected, showing moderate growth.

  In 2017, the global market experienced a significant supply gap across the entire zinc value chain—from zinc ore to finished metal. Due to ongoing tightness at the mine end, zinc ore inventories were completely depleted, severely disrupting smelters’ operating rates. This shortage at the mine level directly cascaded downstream to the metal end. Different institutions projected metal supply gaps ranging from 400,000 to 700,000 tons. Such a supply gap was also reflected in the declining inventories of zinc ingots.

2018 Zinc Market Outlook

  Zinc ore supply is trending toward balance, yet short-term supply remains tight. First, although zinc ore production increased significantly in 2018, the actual net increase was relatively modest due to factors such as declining grades at operating mines and the closure of several smaller mines. Second, over the past few years, China’s actual annual new production has consistently fallen short of projected levels; we anticipate that in 2018, China’s new production will also fall far below the projected output of 250,000 tons. Third, mines such as Gamsberg and New Century will not contribute to an increase in the zinc ore market during the first half of the year, and many domestic mines are also scheduled to ramp up production only in the second half.

  The growth rate of zinc consumption continues to slow down, yet it remains at a moderate pace of 1-2%. Zinc consumption will see slight growth, driven by the negative impact of China’s moderate economic slowdown as well as the stimulus from the global economic recovery led by Europe and the U.S.

  Smelting capacity will not become a bottleneck in 2018. Over the next three years, the bottleneck in zinc smelting capacity has increasingly drawn attention within the industry. Due to poor long-term profitability and concerns about lead pollution, there has been virtually no new capacity added in lead-zinc smelting over the past few years. However, since concentrate supplies remain constrained in 2018, the bottleneck in smelting capacity will not yet become a decisive factor in the zinc market in the short term.

2017 Lead Market Review

  In 2017, lead prices initially declined and then rebounded. Driven by the recovery of the global economy and led by key commodities such as copper and zinc, lead prices showed a rebounding trend in 2017, first declining and then rising, with significant price fluctuations throughout the year. From February to May, prices experienced volatile declines, falling by about 20%. Subsequently, prices began to rise steadily, reaching a peak of US$2,621 on October 4, after which they fluctuated narrowly between US$2,400 and US$2,570.

  The supply of lead ore remains tight. Given the coexistence of lead and zinc, the 2017 lead ore supply landscape mirrored that of zinc ore, exhibiting a relatively tight supply situation. In 2017, China’s refined concentrate deficit stood at approximately 80,000 tons, widening compared to 2016, while the global deficit was around 25,000 tons. The secondary lead industry is undergoing significant transformation, with its share increasing year by year. Globally, the proportion of recycled lead production has exceeded 70%, and domestically, this figure has risen from 35% to over 40%. Looking ahead, as consumption slows down and accumulated stockpiles grow, the share of recycled lead is expected to increase rapidly.

  Consumption of lead-acid batteries has ceased to grow. Looking at the output of lead-acid batteries, China's production from January to October fell by 1% year-on-year, a narrower decline compared to the period from January to September. It is expected that annual production for the full year will be flat with last year's level.

  In 2017, both global lead ore and refined lead experienced slight shortages. Given the close association between lead and zinc, when zinc ore supply became severely tight, lead ore also saw a small shortage—approximately 30,000 tons. However, thanks to the contribution of recycled lead in offsetting the demand for primary lead ore, smelting output was still able to largely meet downstream needs, resulting in only a modest 20,000-ton shortfall on the metal side.
2018 Lead Market Outlook

  The consumption of lead-acid batteries is facing significant challenges. Eighty percent of lead consumption is concentrated in the lead-acid battery sector, with lead-acid batteries used in automobiles and electric bicycles accounting for more than 50% of all lead-acid batteries. The global electric vehicle revolution has already begun, and its impact on lead-acid battery consumption is self-evident. In China, sales of electric bicycles have also entered a phase of saturation and decline, and the emergence of shared bicycle services is further suppressing demand for electric bicycles. Moreover, we’ve observed that, starting in 2016, the state introduced a 4% consumption tax on lead-acid batteries, suggesting that national policy direction may also be unfavorable toward lead-acid batteries.

  Both lead ore and refined lead will see a slight surplus. As supply of lead and zinc ores begins to recover in 2018, the output of mined lead will increase. Meanwhile, newly commissioned recycled lead projects will come online more concentratedly in the second half of next year, ensuring that recycled lead production will also continue to grow. As consumption gradually shifts from incremental growth to stock-based consumption, the lead market balance will start to transition from a slight shortage to a slight surplus.

  Lead prices continue to underperform zinc prices. Unlike the bullish sentiment surrounding zinc, we are relatively pessimistic about lead prices. Looking at a longer time frame, lead prices have yet to break out of their 2010-to-date trading range of $1,600 to $2,800—a range that has clearly underperformed zinc prices. This fundamentally reflects two adverse factors affecting lead prices: the gradually increasing share of recycled lead and the “waning momentum” in lead consumption.

Analysis of Influencing Factors
  First, the growth in the production of austenitic stainless steel will continue to fuel robust demand for nickel resources—both in China and globally. Since 1913, austenitic stainless steel has played the most critical role among all types of stainless steel, accounting for over 70% of both total stainless steel production and consumption. According to data from CRU, over the next five years, the quarterly average production of austenitic stainless steel is expected to rise from 8 million tons per quarter to 11 million tons per quarter. Of this increase, China’s contribution will exceed 50%.

  Second, the robust demand for battery materials in the new-energy sector will become a new driving force behind China’s nickel demand. Given China’s vigorous investment in the new-energy vehicle industry, the strong demand for power batteries and ternary materials in the new-energy sector will emerge as another key growth driver for nickel demand—both in China and globally. In particular, as China plays a leading role in the global new-energy vehicle and power-battery sectors, its growing demand for nickel in the battery industry will outpace the global average growth rate.
Analysis of Supply-Demand Balance and Future Price Trends

  According to CRU data, China’s supply-demand gap has been steadily widening since the third quarter of 2015. Meanwhile, as China’s economy recovers and the country continues to develop and explore new materials and new energy sectors, China’s demand for nickel is expected to remain robust. Over the next five years, China will lead global demand for nickel, directly contributing to the sustained shortage of nickel supply worldwide in the coming period.

  According to the percentile analysis based on price costs, the 25th percentile for global nickel ore in 2016 was $8,600 per ton, the 40th percentile price level was $9,100 per ton, the 60th percentile price level was $11,100 per ton, and the 80th percentile price level was $12,600 per ton. Meanwhile, according to industry statistics, the average production cost of primary nickel iron globally was $13,000 per ton.

  It can be said that after a prolonged period of bottom-range fluctuations, nickel prices have gradually emerged from this range and resumed their upward climb since the second half of 2017, driven by China’s improving economic performance and the long-term “bull market” in China’s steel industry. Over the next five years, nickel prices are expected to continue following the trajectory of the global steel industry, exhibiting price movements closely aligned with those of steel. Based on this outlook, we forecast that in 2018, nickel prices will fluctuate within the 60th to 80th percentile range, reaching between US$11,100 and US$12,600 per ton.

A high-tech manufacturer specializing in copper processing and component manufacturing.

Jin Lai Copper Industry

Copyright © 2025 Shaoxing Shangyu Jiangjing Copper Industry Co., Ltd.

Business license

Powered by : www.300.cn

高效,全方位,最

Sorry,当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry,The current column has no content!

You can view other columns or return Home

Hi

Contact an expert now for answers!

If you’re interested in our products and solutions and would like to learn more, please don’t hesitate to contact us.